Find HDMI Extender, HDMI Kvm Extender, Kvm Extender on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > HDMI Extender > 100m/328FT Over Single Coaxial Cable HDMI Extender (Bi-directional IR+EDID)

100m/328FT Over Single Coaxial Cable HDMI Extender (Bi-directional IR+EDID)

Basic Info

Model No.:  YLE-C100IR

Product Description

Model NO.: YLE-C100IR Home Audio & Theater Watts Per Channel: <50W Speaker System Audio Output Mode: Stereo Control: Wired FM: Without FM Single Link Range: 1080P/60, 12 Bit Color Depth Hdcp: 1.1 Romote Control: Bi-Directional IR System Specification: CE, FCC, RoHS Home Audio & Theater Speaker Mount: Ceiling Player Type: Blue-Ray Player Finish: Metal Housing Sound Channel: 7.1 HDMI Quantity: 1 HDMI Version: HDMI 1.3 Audio: PCM 48kHz Audio Trademark: Mealink Origin: Made in China 100m/328ft over Single Coaxial Cable HDMI Extender(Bi-directional IR+EDID)


1.Introduction

The HDMI Over Single Coax Extender sends HDMI signals Over just one 75Ohm Coaxial cable -- up to100m away. The HDMI Over Single Coax Extender supports HDMI 1.3 and HDCP 1.1 with features such as Deep Color and 1080p.By using standard and widely available 75Ohm RG-6U cables, the HDMI Over Single Coax Extender makes HDMI signal extensions to be easier than heavy and expensive copper cable and more robust than optical fiber. The Extender includes two units: transmitter and receiver.  The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one coaxial cable.  The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals.  The Extender offers the most convenient solution for HDMI extension over a single coaxial cable with long distance capability, and is the perfect solution for any application.
 




2.Features
1. Flexible extension of high-bandwidth HDMI 1.3 thanks to the performance and reliability of 75Ohm RG-6U Coax cable. 
2. Audio and video are transmitted digitally over the 75Ohm RG-6U Coax cable with zero signal loss.
3. Single Link Range: 1080p/60, 12 bit color depth.
4. Compliant with HDMI 1.3, HDCP 1.1 standards.
5. Supports digital video formats in Deep Color Mode at up to 12bits/color.
6. Supports PCM 48KHz audio.
7.Supports Cascade function in Transmitter and Receiver and it is easy to build a network system by installer.
8.Lip-Sync Pass Through.
9.Bi-directional IR system allowing for control of source or display (IR accessories included)





3.Package Contents:

 (1) [TX & RX]
(2) IR Blaster (TX)   
(2) IR Receiver (RX) 
(2) DC 5V in line power supply
(1)User Manual
 


4.Specification
Frequency Bandwidth 225MHz/link (HDMI 1.3)
In/Output Support Resolution
 
480i, 576i, 720p@50/59.94,60
1080i@50/59.94/60
1080p@23.98/24/25/29.97/30/50/59.94/60
Input TMDS Signal: 3.3 volts
Input DDC Signal: 5.0 volts/P-P
ESD Protection Human body model ±8kV (air-gap discharge)
±4kV (contact discharge)
Coaxial Cable Distance Full HD up to 100M (RG-6U cables)
HD up to 200M (RG-6U cables)
SD up to 300M (RG-6U cables )
Dimension (mm) 100(D)x105(W)x25(H)
Weight (g) 280
Power Supply: (2) 5V1A DC
Power consumption: 2.3 watts (TX); 2.2 watts (RX)
Operation temperature: 32~104 °F
Storage temperature: -4 ~140 °F
Relative humidity: 20~90 % RH (no condensation)



5.Operation Controls and Functions


1.Transmitter
 
                          Front Panel                                                      Rear Panel
100m/328FT Over Single Coaxial Cable HDMI Extender (Bi-directional IR+EDID)


1.        LINK LED:This LED will illuminate when the device is connected with HDMI source
2.        HDMI IN: This slot is to connect with the input source equipment such as DVD or Blue-ray player with connection cable for input video and audio signal transmission.
3.        IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.
4.         IR TX: Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the equipment to be controlled.
5.         EDID: The EDID switch allows to pre-set an EDID to encourage a "handshake" between the display and source.
 
 
Position EDID Description
0  0 1080p, 2CH PCM 48KHz
0  1 1080p, 5.1CH PCM 48KHz
1  0 1080p, 7.1CH PCM 48KHz
1  1 1080i, 2CH PCM 48KHz
      
 
 
 
 
 
  Power LED: This red LED will switch on when the device is connected with the power supply.
1).         DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet. The red LED will turn on when the power is on.
2).         Coax Out : Connect one 75ohm RG-6U coax cable between the transmitter and the receiver BNC port.






1.     Receiver
                    
                  Front Panel                                                                          Rear Panel

u          LOCK LED: This LED will illuminate when the HDMI signal from the transmitter is stable.
u          HDMI Out: This slot is where you connect a HDMI display with a HDMI Cable .
u          IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.
u          IR TX: Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the equipment to be controlled.
u          Power LED: This red LED will switch on when the device is connected with the power supply.
u          DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet. The red LED will turn on when the power is on.
u          Coax IN: Connect one 75ohm RG-6U coax cable between the transmitter and the receiver BNC port.
u          LOOP OUT: Connect one 75ohm RG-6U coax cable between the receiver with the next receiver BNC port.
 
6,      Wideband IR(20KHz---60KHz) Introduction
 
 
IR RECEIVER (RX)
To control the source:  Plug IR Receiver into IR RX port of receiver unit; place receiver at or near display.
To control the display:  Plug IR Receiver into IR RX port of transmitter unit; place receiver in position where it is able to receive remote signals.
 
IR BLASTER (TX)
To control the source:  Plug IR Blaster into IR TX port of transmitter unit; place blaster in front of the IR eye of the source.
To control the display:  Plug IR Blaster into IR TX port of receiver unit; place blaster in front of the IR eye of the display.

 
  7.    Connection and Installation
100m/328FT Over Single Coaxial Cable HDMI Extender (Bi-directional IR+EDID)
100m/328FT Over Single Coaxial Cable HDMI Extender (Bi-directional IR+EDID)

Contact us if you need more details on HDMI Extender. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Coaxial HDMI Extender、100m HDMI Extender. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : HDMI Extender

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters